Pyeong, exclusive area and supply area
The same 84 ㎡ home is called “25 pyeong” on one listing and “34 pyeong” on another. Both can be right — they measure different areas.
Why one 84 ㎡ home is "25 pyeong" and another is "34 pyeong"
An 84 ㎡ apartment is listed as "25 pyeong" in one place and a "34-pyeong unit" in another. Neither number is wrong — one measures exclusive area and the other measures supply area. Mixing them up means comparing two homes on different scales.
One pyeong is exactly 400/121 ㎡, about 3.3058 ㎡. A pyeong is the square formed by a 6 ja (尺) side, where 1 ja is defined as 10/33 m, so 6 × 6 = 36 ja² = 400/121 ㎡. Because that value is a repeating decimal, rounding alone can move a price per pyeong by a noticeable amount.
What each area actually measures
- Exclusive area — inside your own front door: rooms, living room, kitchen, bathroom, plus part of the wall thickness (inner walls in full, walls shared with a neighbour at half). An unexpanded balcony is not counted.
- Supply area — exclusive area plus residential common area: lifts, stairs and corridors shared by everyone in the building. The "34-pyeong" figure in a sales advert is usually this one.
- Contract area — supply area plus other common area such as the underground car park, management office and security post. This is common in commercial units and officetels.
The order is always exclusive ≤ supply ≤ contract. Exclusive divided by supply is the efficiency ratio: about 70–80% for apartments, but often 40–50% for officetels with long corridors.
Worked example
- Exclusive 84 ㎡ → 84 × 0.3025 ≈ 25.4 pyeong
- Supply 110 ㎡ → 110 × 0.3025 ≈ 33.3 pyeong (the "34-pyeong unit")
- Efficiency ratio = 84 ÷ 110 ≈ 76%
- The same exclusive 84 ㎡ with a supply of 105 ㎡ gives an 80% ratio — more usable space for the same headline number.
What to check when comparing listings
- Convert every listing to the same basis before comparing price per pyeong. Price per pyeong on an exclusive area and on a supply area look similar but are not the same thing.
- "N-pyeong unit" usually refers to supply area, but contracts are required to state exclusive area. Trust the number printed on the contract.
- A low efficiency ratio means more shared space, which can mean higher maintenance and heating costs.
- Balcony expansion is not reflected in the exclusive area, so the space you actually feel differs between expanded and unexpanded units.
Related tools
- Pyeong ↔ ㎡ converter — pyeong, ㎡, ft² and tatami in one place.
- Unit converter — length, weight, temperature and area units.
- Square feet calculator — move between ft², ㎡ and pyeong.
Sources
- Korean Law Information Center — Enforcement Rule of the Housing Act (supply area calculation) and Enforcement Decree of the Building Act (area measurement)
- Ministry of Land, Infrastructure and Transport — area labelling rules for apartment sales adverts
- 1 pyeong = 400/121 ㎡, derived from the definition 1 ja = 10/33 m
Last reviewed November 17, 2026